Preparations
Presser Foot Pressure
The presser foot pressure has been pre-set to the
standard value ”N”. In most cases, you do not need to
adjust the presser foot pressure. For specialty
techniques, or when sewing on very light or heavy
fabric, adjusting the pressure can improve the result. For
very light fabrics, turn the dial to a lower number. For
heavy fabric, turn the dial to a higher number.
The presser foot is lowered or raised with the presser
foot lift (A). If you are sewing on heavy fabric or several
layers of fabric, the presser foot can be raised higher (B)
to make it easier to place the fabric underneath the
presser foot.
Note: The machine will not start when the presser foot is
raised (except for bobbin winding).
Changing the Presser Foot
Remove Presser Foot
Press the presser foot downwards until it disengages
from the presser foot holder.
24
To Next Page
Loading...
