Sequencing
Select Character Set and Font
Press the - or + buttons just to the right of the character
set indicator (3) to change character set between upper
or lower case, normal or special letters and symbols.
Press the - or + buttons just to the right of the font
indicator (4) to change fonts.
Adjust Text and Stitches
Press the sequence button to enter sequence view. You
can mirror, adjust length and width or change the
density, elongation and stitch position of the selected
stitch. The adjustments work just like in sewing mode.
See page 34. When you have changed a value, the digits
will be highlighted on the graphic display to show that
the value is not default.
Note: The adjustments will only affect the stitch at the cursor
position. If you return to sewing mode, all adjustments made
there will affect the entire sequence and will not be saved you
return to sequencing.
Delete a Stitch or Letter in a Sequence
If you want to delete a stitch, move the cursor to the
stitch you want to delete and press the clear button. To
delete the entire sequence from the stitch field, long
press the delete button.
Saving your sequence works just like in sewing mode.
See page 35.
Note: If another sequence is already saved, a pop-up will
appear asking if you wish to overwrite. Select yes or no with
the arrow buttons and press OK.
43
To Next Page
Loading...
Need help?
General
