Alignments
EN 197JL2.1E AA 8.
8.4.3 Service Options
Select the sub menu's to set the initialisation codes (options) of
the set via text menus.
Table 8-5 Service options
8.4.4 Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the EAROM is replaced, all options will require resetting.
To be certain that the factory settings are reproduced exactly,
you must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set.
Example: The options sticker gives the following option
numbers:
• 01617 00004 02137 20544
• 01030 00000 00551 00000
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See next table for the option overview.
Menu-item Subjects Options Description
PIP/DS Dual Screen None / 1 tuner / 2 tuners no DS / DS with one tuner / DS with two tuners
Data TV Guide US On / Off Feature present / not present
Display Screen “Value” Used screen size, type, and resolution
(see table “Option code overview” for the values)
Scanning Backlight On / Off Feature present / not present
Dimming Backlight On / Off Feature present / not present
Video Repro Picture Processing SPIDER / No SPIDER Feature present / not present
Combfilter None / 2D / 3D Only selectable with Columbus in set: No/without RAM/with RAM
Ambient Light None / Mono / Stereo Inverter not present / two inverters mono / two inverters stereo
MOP On / Off Feature present / not present (for sets with AmbiLight this is “on”)
Source Selection HDMI 1 None / Audio / No Audio No HDMI / HDMI with analog audio / HDMI without analog audio
HDMI 2 None / Audio / No Audio No HDMI / HDMI with analog audio / HDMI without analog audio
USB version None / 1.1 / 2.0 + CR No USB / USB 1.1 in side I/O panel / USB 2.0 in card reader panel
IEEE1394 Yes / No Connector present / not present
Ethernet Yes / No Connector present / not present
S/PDIF inputs None / 1 conn. / 2 conn. None / 1 connector present (in)/ 2 connectors present (in/out)
Audio Repro Subw. Internal Present Yes / No Internal sub woofer present / not present
Acoustic System
(Cabinet design, used for
setting dynamic audio
parameters).
None
Entry ME5 5W
Entry ME5 15W
(Soft) Wrap
Top xxPF9830
Entry+
Others
Miscellaneous Alternative Tuner Philips / Alps Tuner brand
Tuner Type TD1336S Tuner type
Opt. no. Group 1 xxxxx xxxxx xxxxx xxxxx (see set sticker)
Group 2 xxxxx xxxxx xxxxx xxxxx (see set sticker)
To Next Page
Loading...
