(
DIM
– to select various dim mode : DIM 1, DIM 2,
DIM 3 or DIM OFF.
)
AUTO REV. (AUTO REVERSE)
– to select the desired tape playback modes.
¡
TIMER
– to display timer or set the timer.
™
REPEAT
– to playback track(s)/disc(s)/programme
repeatedly.
£
SHUFFLE
– to playback all available discs and their tracks/
programme in random order.
≤
TIMER ON/OFF
– to activate or deactivate the timer function.
∞
NEWS
– to hear News automatically.
§
SLEEP
– to activate, deactivate or set the sleep timer
function.
≥
RDS
– to select RDS information.
•
CLOCK
– to display clock or set the clock.
ª
B
– to switch the system to Standby mode or Eco
Power Standby mode.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD 123 or
TUNER, for example).
– Then select the desired function (
É
,
í
,
ë
, for example).
12
English
Basic Functions
IMPORTANT!
Before operating the system, complete the
preparation procedures.
Plug and Play
Plug and Play allows you to store all available
RDS stations and radio stations automatically.
If Plug and Play has not been installed
1
When you turn on the system, "
AUTOAUTO
AUTOAUTO
AUTO
INSTALLINSTALL
INSTALLINSTALL
INSTALL
--
--
-
PRESS PLAYPRESS PLAY
PRESS PLAYPRESS PLAY
PRESS PLAY" will be
displayed.
2
Press PLAYÉ(ÉÅ) on the system to start
installation.
➜ "
INSTALLINSTALL
INSTALLINSTALL
INSTALL" will be displayed and followed
by "
TUNERTUNER
TUNERTUNER
TUNER" and then "
AUTOAUTO
AUTOAUTO
AUTO".
➜
PROGRAM
will start flashing.
➜ The system will search for all RDS stations
and then continue with radio stations on FM,
MW and LW band respectively. Weak RDS
stations may be stored in later presets.
➜ All available RDS and radio stations with
sufficient signal strength will be stored
automatically.
➜ The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
➜ The last preset radio station or the first
available RDS station will play when Plug and
Play is completed.
3
The system will proceed to set the RDS time
automatically with the stored RDS preset station.
● If no RDS station is found in the first preset
station;
➜ The programme will exit automatically.
● If RDS radio station is found;
➜ "
INSTALLINSTALL
INSTALLINSTALL
INSTALL" will be displayed and followed
by "
TIMETIME
TIMETIME
TIME".
● When searching RDS time;
➜ "
SEARCH RDS TIMESEARCH RDS TIME
SEARCH RDS TIMESEARCH RDS TIME
SEARCH RDS TIME" will be displayed.
➜ When RDS time is read, "
RDS TIMERDS TIME
RDS TIMERDS TIME
RDS TIME" will
be displayed. The current time will be displayed
for 2 seconds and stored automatically.
➜ If RDS station does not transmit RDS time
within 90 seconds, the programme will exit
automatically and the display will show “
NONO
NONO
NO
RDS TIMERDS TIME
RDS TIMERDS TIME
RDS TIME”.
To reinstall Plug and Play
1
In Standby or Demonstration mode, press and
hold PLAYÉ(ÉÅ) on the system until
"
AUTO INSTALLAUTO INSTALL
AUTO INSTALLAUTO INSTALL
AUTO INSTALL
--
--
-
PRESS PLAYPRESS PLAY
PRESS PLAYPRESS PLAY
PRESS PLAY" is
displayed.
2
Press PLAYÉ(ÉÅ) again to start installation.
➜ All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
● Press Çon the system.
To Next Page
Loading...
