Philips MC-50/22 - CD Operation; Bass (Treble); Discs for Playback; Loading Disc

2-6
15
English
Basic Functions
Bass/Treble The BASS (low tone) and TREBLE (high tone) feature enables you to define the sound- processor settings.
● Press BASS +/- or TREBLE +/- on the
remote control repeatedly to select the next Bass or Treble level. OR
VOL
BASS TREBLE
1
2
=
=
=
=
1
Press BASS or TREBLE on the system to select Bass or Treble sound feature.
2
Adjust the VOL on the system to select the desired Bass or Treble level. ➜ "
BASS XXBASS XX BASS XXBASS XX
BASS XX" or "
TREB XXTREB XX TREB XXTREB XX
TREB XX" will be
displayed. "
XXXX XXXX
XX" denotes the level as follows :
MINMIN MINMIN
MIN
™™ ™™
™
-2-2 -2-2
-2 …
™™ ™™
™
00 00
0
™™ ™™
™
11 11
1…
™™ ™™
™
+2+2 +2+2
+2
™™ ™™
™
MAXMAX MAXMAX
MAX …
Notes: – The volume knob can be used to adjust Bass/ Treble level immediately after you have selected the respective Bass/Treble sound feature. If the volume knob is not used within 5 seconds, it will become normal volume control function. – The Bass/Treble mode will exit automatically if wOOx feature selected (for model MC-70 only).
IS (Incredible Surround) The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect.
● Press IS on the remote control repeatedly to
activate/deactivate the surround sound effect. ➜ If activated,
INCREDIBLE SURROUND
will
appear on the display and “
INCRINCR INCRINCR
INCR
SURROUNDSURROUND SURROUNDSURROUND
SURROUND” will be displayed. ➜ If deactivated, “
IS OFFIS OFF IS OFFIS OFF
IS OFF” will be displayed.
16
English
CD Operation
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc into each tray.
Discs for Playback This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs.
Loading Disc
1
Press 3CDC (CD 123) to select CD mode.
2
Press one of the disc OPEN•CLOSE button (DISC 1, DISC 2 or DISC 3) to open the desired disc tray. ➜ The selected disc tray slides out.
3
Load a disc with the label side facing up.
4
Press again the corresponding button to close the disc tray. ➜ “
READINGREADING READINGREADING
READING“ will be displayed. The selected
disc tray, total number of tracks and the playing time will appear on the display. To select a desired disc tray
● Press 3CDC (or CD 123 on the remote
control) repeatedly. ➜ "
DISC 1DISC 1 DISC 1DISC 1
DISC 1", "
DISC 2DISC 2 DISC 2DISC 2
DISC 2" or "
DISC 3DISC 3 DISC 3DISC 3
DISC 3" will be
displayed. Notes: –To ensure good system performance, wait until the disc trays completely read the disc(s) before proceeding. – The CD changer is only able to read the status of the current selected disc tray.
-
-+
-
CD / CD
-
R/CD
-
RW COMPATIBLE
DISC 1 DISC 2 DISC 3
OPEN• CLOSE
STANDBY
-
ON
ECO POWER
iR
AUX/ CDR
PROG
PRESET
TAPE
SEARCH/TUNE
TUNER
DEMO STOPPAUSE
PREV NEXT
REC
STOP
3 CDC
PLAY
NEWS
-+
DC
3
CHANGER
DISC 1 DISC 2 DISC 3
OPEN•CLOSE
POWER ON/OFF
DC
3
CHANGER
CD/CD
-
R/CD
-
RW COMPATIBLE
www.freeservicemanuals.info
It`s Free