FL MGUARD GT/GT
105656_en_05 PHOENIX CONTACT 193
Floating signal contact
Voltage 24 V DC
Current carrying capacity 100 mA
Interfaces [...] FL MGUARD GT/GT
Ethernet interfaces FL MGUARD GT/GT
Properties of RJ45 ports
Quantity 2 with autocrossing and auto negotiation
Connection format 8-pos. RJ45 socket on the switch
Connection medium Twisted-pair cable with a conductor cross section of 0.14 mm
2
to 0.22 mm
2
Cable impedance 100 Ohm
Transmission speed 10/100/1000 Mbps
Maximum network segment expansion 100 m
Properties of the SFP interfaces
Quantity 2
Connection format SFP slot module
Connection medium Fiber optics
Connection LC format
Data transmission speed 100 Mbps or 1000 Mbps (depending on SFP module used)
Maximum network expansion Depending on the SFP module used
Optical fiber type Depending on the SFP module used
Mechanical tests FL MGUARD GT/GT
Shock testing according to IEC 60068-2-27 Operation: 30g/11 ms,
Half-sine shock pulse
Storage/transport: 50g,
Half-sine shock pulse
Vibration resistance according to IEC 60068-2-6 Operation/storage/transport: 5g, 57 Hz ... 150 Hz
Free fall according to IEC 60068-2-32 1 m
To Next Page
Loading...
