FL MGUARD PCI(E)4000
105656_en_05 PHOENIX CONTACT 197
9.2 Startup
9.2.1 Safety notes
To ensure correct operation and the safety of the environment and of personnel, the device
must be installed, operated, and maintained correctly.
General notes regarding usage
9.2.2 Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
– FL MGUARD PCI4000
– Package slip
NOTE: Risk of material damage due to incorrect wiring
Only connect the device network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the device.
NOTE: Connection notes
– A free PCI slot (3.3 V or 5 V) must be available on your PC when using the
FL MGUARD PCI4000.
– Do not bend connecting cables. Only use the network plug for connection to a net-
work.
NOTE: Select suitable ambient conditions
– Ambient temperature:
0°C ... +60°C (FL MGUARD PCI4000 with battery)
0°C ... +70°C (FL MGUARD PCI4000 without battery)
– Maximum humidity, non-condensing:
5% ... 95%
To avoid overheating, do not expose the device to direct sunlight or other heat sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
To Next Page
Loading...
