FL MGUARD CENTERPORT
238
PHOENIX CONTACT 105656_en_05
After successful connection establishment
Once a connection has been established successfully, a security alert may be displayed.
Explanation As administrative tasks can only be performed using encrypted access, a self-signed certif-
icate is supplied with the device.
• Always click “Yes” to acknowledge the security alert.
The login window is displayed.
Figure 11-5 Login
• Enter your user name and password which are specified for this access type.
For access type “Administration”, the user name and password are set by default (please
note these settings are case-sensitive):
The device can then be configured via the web interface.
For additional information, please refer to software reference manual.
UserName: admin
Password: mGuard
For security reasons, we recommend you change the default root and administrator pass-
words during initial configuration.
To Next Page
Loading...
