Reports, Displays, and Messages
A number of commands are available to display or print information about current settings in PhoneSuite.
In addition, system messages are printed at various times, SMDR data can be printed about completed
calls, and costed call records can be printed if the optional Call Accounting Card is installed. These reports,
displays, and messages are detailed in this section.
Note: The printed reports and messages will print to any PhoneSuite parallel and/or serial port that is set
up by the installer to output that type of information (A-Level Reports, B-Level Reports, System Events,
Call Accounting Events, Incoming Call SMDR Data, and Outgoing Call SMDR Data).
A20 Individual Extension Wakeup Report
This command prints the Wakeup Call status for a single extension. To print this report, dial A-2-0 on the
console keypad. The display will read:
Prt Wake Status
Ext EEE D=Exit
Enter the extension number, and the extension’s Wakeup Report will print as a 2-line message. The report
contains the following information:
Date/time MM/DD/YY HH:MM
Ext EEE For HH:MM <STATUS> n Day
Where MM/DD/YY HH:MM is the current date and time and EEE is the extension number. The HH:MM
after the word “For” is the time the Wakeup Call is set to occur (if there is one), and n Day represents the
number of repeat wake-up calls remaining. “* Day” means the wake-up call will repeat each day indefi-
nitely. The <STATUS> portion of the message will read:
NONE No Wakeup Call Setting / Activity
PEND n Calls Wakeup Call is set and waiting to occur or in progress
ANSWD n Calls Wakeup Call at indicated setting was answered
OFFHK n Calls Phone was off-hook when Wakeup Call was attempted
ALARM n Calls Wakeup Call at indicated setting was not answered
A21 System Wakeup Report
This command prints a report that shows the Wakeup Call setting or last status change for every extension
in PhoneSuite. To print this report, dial A-2-1 on the console keypad. The display will read:
Print All Wake
Calls (Ent) D=Ex
PhoneSuite
®
Console User’s Manual rev. 081106 35
To Next Page
Loading...