46 PhoneSuite
®
Console User’s Manual rev. 081106
A40 Clear Extension Features
This command clears specific “features” that may be set for an extension. These features include: Do Not
Disturb mode (if on, it’s turned off), call forwarding (the extension is set to not forward calls), call-on-hold
status (if a call is on hold, it is removed from its connection to the extension, so the extension is not able to
retrieve it from on hold, and the caller must hang up and call in again).
Note: This command does NOT clear any voice mail messages the extension has.
These extension features can be cleared by pressing the “Clear Ext Features” feature-key button on the
console, or by using the A40 command. Both commands work the same way.
To use the A40 command, dial A-4-0 on the console keyboard. The display will read:
Clear Features
EEE D=Exit
Enter the extension number, for example 101, and the display will read:
Clear Features
101 Enter? D=Ex
Press Enter (#) to clear the extension’s current feature settings, or Exit (D) to quit without making any
changes.
To Next Page
Loading...