PHOTONIS Nocturn - Page 28

PHOTONIS | 28
NVT 200-LC-0103
Revision: D
Page 28 of 43
Description
Image
Wait for the installation of the GUI to complete.
At the “Installation Complete” screen, click the “Finish”
button to exit the installer.
Connect the camera to the USB port on the host PC.
Launch the evaluation GUI: go to “Start” and under “All
Programs” find the “PHOTONIS USA” directory and
click on the NOCTURN XL icon.
The software will start and the splash screen will
appear showing the GUI version information and
revision date.