Physio Control LIFEPAK 9 - Page 19

Description 1
Table 1-1 LIFEPAK 9 defibrillator/monitor Specifications* (cont.)
General
AC INPUT OPTIONS 120 or 240Vac nominal line voltage without adjustment. 50 or 60Hz
with adjustment in Setup Menu.
BATTERY TYPE Sealed lead-acid, 16Vdc nominal, 3 Ahr.
BATTERY CAPACITY A new, fully-charged battery will provide one of the following prior to
shutdown:
Typical Minimum
Number of 360J discharges: 75 40
Minutes of monitoring: 90 70
LOW BATTERY INDICATOR Advises operator to connect ac power. Battery capacities before and
BATTERY CHARGE INDICATOR
BATTERY CHARGE TIME
SERVICE INDICATOR
POWER CONSUMPTION
SIZE
Height:
Width:
Depth:
Weight:
POWER CORD LENGTH
STANDARD PADDLE
ELECTRODE AREA
after warning (LOW BATTERY-CONNECT AC POWER) for a new,
fully charged battery are:
Typical Minimum
Number of 360J discharges before warning: 50 20
Number of 360J discharges after warning: 25 5
Indicator BATT CHRG illuminates when battery is charging.
24hrs to full capacity.
Message SERVICE indicates self-diagnostic routines have detected
improper operation requiring service attention.
160W maximum while monitoring with recorder on and defibrillator
charging.
35.2cm (13.9in)
29.7cm (11.7in)
31.0cm (12.2in)
12.7kg (28lbs)
3m (10ft)
82cm?
Environmental
ATMOSPHERIC PRESSURE
RELATIVE HUMIDITY
TEMPERATURE RANGE
797 to 500mm Hg (-570 to 11,000ft).
0 to 95% (non-condensing) at 0 to 34°C (32 to 94°F).
0 to 80% (non-condensing) at 35 to 45°C (95 to 113°F).
0 to 45°C (32 to 113°F) operating.
—30 to 65°C (-22 to 149°F) storage.
© August 1993 Physio—Control
All Rights Reserved 1-5