PIAGGIO MSS Fly 50 4T User Manual

Static test
Static control after the test ride:
- Starting when warm
- Starter operation
- Minimum hold (turning the handlebar)
- Uniform turning of the steering
- Possible leaks
CAUTION
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE.
CAUTION
NEVER EXCEED THE RECOMMENDED INFLATION PRESSURES OR TYRES MAY BURST.
Functional inspection
Functional check up:
Braking system (hydraulic)
- Lever travel
Braking system (mechanical)
- Lever travel
Clutch
- Proper functioning check
Engine
- Throttle travel check
Others
- Check documentation
- Check the frame and engine numbers
- Tool kit
- License plate fitting
- Check locks
- Check tyre pressures
- Installation of mirrors and any accessories
MSS Fly 50 4T Pre-delivery
PRE DE - 149

PIAGGIO MSS Fly 50 4T Specifications

General

Power Output RPM	7, 500 rpm
Torque	3.2 Nm
Fuel System	Carburetor
Rear Brake	Drum
Seat Height	760 mm
Fuel Tank Capacity	6.5 liters
Front Suspension	Telescopic fork
Rear Suspension	Hydraulic shock absorber
Length	1, 880 mm
Width	735 mm
Engine Type	Single cylinder, 4-stroke
Cooling System	Air-cooled
Transmission	Automatic
Front Brake	Disc