PicoQuant HydraHarp 400 - View Menu

PicoQuant GmbH HydraHarp 400 Software V. 3.0.0.1
6.2.3. View Menu
The View menu offers the following commands:
Toolbar Shows or hides the toolbar.
Status Bar Shows or hides the status bar.
Axis Panel Shows the axis settings panel.
Control Panel Shows the control panel.
Trace Mapping Shows the trace mapping dialog.
Toolbar command
Use this command to display and hide the Toolbar, which includes buttons for the most common commands,
such as File Open. A check mark appears next to the menu item when the Toolbar is displayed.
Shortcut
Keys: <Alt>+V T
Status Bar command
Use this command to display and hide the status bar, which describes the action to be executed by the
selected menu item or depressed toolbar button, the current measurement activity and keyboard latch state. A
check mark appears next to the menu item when the status bar is displayed. The status bar is displayed at the
bottom of the HydraHarp main window.
Shortcut
Keys: <Alt>+V S
Axis Panel command
Use this command to display the axis settings panel. The result is the same as the axis panel button in the
toolbar or double clicking the on the histogram axes. The axis settings panel can be closed by clicking its close
button.
Shortcut
Keys: <Alt>+V A
Control Panel command
Use this command to display the control panel. This is the same as the control panel button in the toolbar. The
control panel can be closed by clicking its close button.
Shortcut
Keys: <Alt>+V C
Trace Mapping command
Use this command to display the trace mapping dialog. This is the same as the corresponding button in the
toolbar. The trace mapping dialog can be closed by clicking its close button.
Shortcut
Keys: <Alt>+V M
Page 46