© 2020 Pierce Manufacturing Inc. All Rights Reserved. Scheduled Inspections / 7-1
Chapter 7
LUBRICATION AND
MAINTENANCE INTERVALS
Scheduled Inspections
7-1. Introduction
Refer to the following charts for service and lubrication requirements. Perform services at the indicated interval of
miles or time, whichever comes first.
NOTE: The services and inspections intervals in this section cover the Pierce vehicle in its basic or most
common form. Because custom chassis are built with a variety of components from different
vendors, be sure to refer to the inspection or service documentation for those vendor components
installed on your vehicle. Many of these vendor documents can be found in the Pierce Service
Manual.
7-1.1 Initial Inspection Upon Delivery
Initial Preventative Maintenance, Checks, and Services
System/Component Action Miles
Alternate
As Indicated
Spring U-Bolts Check torque and tighten as required (after initial delivery). 500 Initial
Inspection
Comments or Additional Items
To Next Page
Loading...
