Need help?Do you have a question about the Pierce Enforcer and is the answer not in the manual?
Details who is qualified to use, service, and maintain the vehicle, emphasizing trained personnel.
Provides information on identifying the vehicle, including the FMVSS Information Decal.
Outlines steps for contacting customer assistance for questions or concerns regarding the apparatus.
Defines the operator's responsibilities for safe operation and understanding the manual.
Lists organizations for keeping up-to-date on fire fighting knowledge and standards.
Explains the different types of warning and caution statements used throughout the manual.
Provides general safety warnings and cautions applicable to vehicle operation and maintenance.
Summarizes common safety labels and stresses the importance of understanding and replacing them.
Provides safety guidelines and techniques for safely backing the vehicle to prevent accidents.
Discusses the unique handling characteristics of heavy trucks and the importance of safe operation.
Details the dangers of electrocution from overhead power lines and safety precautions.
Explains the hazards associated with high-pressure hydraulic fluid leaks and necessary precautions.
Covers characteristics of tanker trucks and recommendations for preventing rollovers.
Explains lockout/tagout procedures to protect personnel from accidental energization or start-up.
Provides instructions on how to report safety defects to NHTSA and Pierce Manufacturing.
Emphasizes the importance of considering weight distribution and axle capacity for safe operation.
Details the importance of proper tire inflation for safe vehicle performance and handling.
Explains brake balance in fire apparatus service and its unique considerations.
Provides a recommended procedure for burnishing brakes to optimize performance and minimize noise.
Instructions for removing Carwell coating from the vehicle's underside.
Discusses modifications and the need for manufacturer consent for changes to original equipment.
Refers to a separate guide for information concerning radio installation in Pierce fire apparatus.
Provides guidelines for loading equipment to ensure vehicle balance and prevent lean.
Information on adjusting front spring/suspension for ride height and lean correction.
Information on adjusting rear spring/suspension for ride height.
Discusses suspension settling and fastener tightening after initial operation.
Details safe practices for entering and exiting the vehicle, including step and hand-hold care.
Instructions for unlocking and locking doors using the optional keyless entry system.
Covers seat belts, seat belt monitoring, and optional side roll/frontal impact protection systems.
Details the operation of the vehicle's HVAC system, including defroster, heater, and AC.
Instructions for proper stowing of hose onto hose reels, including safety warnings.
Overview of the instrument panel layout, controls, and indicators found on the vehicle.
Information on the operation and maintenance of the windshield wiper system.
Details the functionality and data recorded by the Vehicle Data Recorder (VDR) system.
Describes the Command Zone III system, an optional control and monitoring device for the vehicle.
Comprehensive guide to performing pre-trip inspections to ensure vehicle safety and operational readiness.
Specifies the number of occupants allowed and seating position requirements for safe operation.
Provides safety instructions regarding compartment doors, emphasizing keeping them closed.
Details the procedures and safety precautions for operating the cab tilt system.
Covers various electrical system components, including alternator, ammeter, battery, and switches.
Provides safety guidelines for operating the vehicle in high heat sources and near flying embers.
Emphasizes the importance of proper mirror adjustment for safe vehicle operation and visibility.
Refers to separate manuals for pump operating information.
Discusses the limitations and risks of fording water with the vehicle, providing instructions if necessary.
Details safe practices and precautions for operating a vehicle-equipped winch.
Provides step-by-step instructions for safely starting the vehicle's engine.
Covers engine operation, including warnings about excessive idling and engine-specific instructions.
Details the correct procedure for shutting down the engine, including cool-down periods.
Explains the function and use of the optional emergency shutdown feature.
Covers inspection, service, and maintenance of the vehicle's cooling system.
Provides instructions for jump-starting the vehicle's engine using another vehicle's battery.
Warns about operating the engine in fuel-rich atmospheres and outlines necessary precautions.
Explains the function of the air restriction indicator and potential causes of restricted airflow.
Details the specific fluid requirements for the engine, including diesel fuel and oil specifications.
Provides a warning and caution regarding the use of the hand throttle.
Offers guidelines for operating the engine and pumper in cold weather conditions.
Covers operation of the automatic transmission, including temperature and shift procedures.
Details various axle types and differential options, including No Spin and Driver Controlled Differential Lock.
Covers brake operation, including downhill braking, air pressure indicators, ABS, and parking brakes.
Explains different auxiliary braking systems, including compression, exhaust, and retarders.
Covers stability control systems like Roll Stability Control (RSC) and Electronic Stability Control (ESC).
Provides guidance on steering system inspection, adjustment, and potential issues.
Information on tire chain clearance and the use of automatic tire chains.
Explains the standard and optional tire pressure management systems and their alerts.
Covers cold weather operation and fluid requirements for the cab tilt system.
Details maintenance for door latches, regulators, handles, strikers, and weatherstripping.
Provides instructions for inspecting and replacing wiper blades.
Covers maintenance for the HVAC system, including heater shut-off and air conditioning.
Details maintenance for seat belts and the optional side roll protection system.
Inspect boom support for structural integrity and tighten fasteners to specified torque.
Covers reservoir checks, inspection of lines, and condition of lube points for automatic lubrication systems.
Discusses interior fasteners and the importance of periodic inspection and tightening.
Details inspection and alignment procedures for front and rear axles, including TAK-4™ suspension.
Covers general brake maintenance, including inspection and specific information for TAK-4™ suspension.
Refers to manufacturer's manual for rear suspension maintenance schedules and procedures.
Covers inspection of springs and spring stops, and tightening of suspension shackle fasteners.
Provides references for front and rear TAK-4™ suspension maintenance and inspection.
Overview of the Command Zone™ multiplex system, including its components and functionality.
Covers DC electrical system components, including alternator, batteries, and wire harnesses.
Details the AC electrical system, including APUs, shore power, and inverters, with high voltage warnings.
Covers engine maintenance, including air intake system, belts, and diagnostic software.
Details coolant checks, antifreeze types, and the procedure for filling the cooling system.
Covers fuel delivery system and fuel filter replacement procedures.
Emphasizes periodic inspection of the exhaust system, including DPF and insulation.
Covers maintenance for driveshafts, transmission fluid, and external transmission coolers.
Refers to the transfer case manual for maintenance schedules and procedures.
Provides guidance on steering system inspection, adjustment, and potential issues.
Details towing instructions, preparation, and methods for different axle configurations.
Provides instructions and precautions for welding on the vehicle, emphasizing electronic component disconnection.
Covers tire ratings, inflation, wear inspection, matching, and wheel installation procedures.
Covers service and lubrication requirements at various intervals, including initial delivery and daily checks.
Details the initial preventative maintenance checks and services required upon vehicle delivery.
Outlines the daily preventative maintenance checks and services for various vehicle systems.
Provides a list of weekly preventative maintenance checks and services for optimal vehicle condition.
Details the monthly preventative maintenance checks and services for various vehicle components.
Lists semi-annual preventative maintenance checks and services for key vehicle systems.
Outlines annual preventative maintenance checks and services for various vehicle systems.
Details preventative maintenance checks and services required every 3-5 years.
Lists annual maintenance requirements for various vendor-supplied components.
To Next Page
General