Pierce Enforcer - 5-1.6 Brake Testing

OPERATION
5-4 / Pre-Trip Inspections
© 2020 Pierce Manufacturing Inc. All Rights Reserved.
5-1.4 Interior Inspection
Interior Inspection
Cab Interior
Lower cab and ensure that the parking brake is set. Put gearshift in neutral and start the engine. Perform the
following checks:
 No unusual noises.
 All gauges indicate within normal operating ranges.
 Oil pressure indicates normal within seconds after engine is started.
 Voltmeter indicates normal electrical voltage.
 Coolant temperature begins a gradual rise to normal operating range.
 Review indicator lights to ensure all bulbs are functional.
Functional Controls
Check all of the following for looseness, sticking, damage, or improper setting. Ensure that all are operational.
 Steering wheel.
 Accelerator.
 Brake controls.
 Parking brake.
 Retarder controls (if so equipped).
 Transmission controls.
 Interaxle differential lock (if so equipped).
 Horn(s).
 Windshield wiper/washer.
 Lights.
 Headlights.
 Dimmer switch.
 Turn signal.
 4-way flashers.
 Clearance, identification, and marker lights.
 Tire chains (when winter conditions require them).
Glass
Check mirrors and windshield.
 Windshield is free of dirt and ice.
 Windshield is free from cracks or distortion.
 Mirrors are clean and properly adjusted.
Safety Equipment
Ensure that the vehicle is equipped with the following safety equipment:
 Spare electrical fuses (if equipped).
 Three red reflective triangles.
 Properly charged and rated fire extinguisher.
PRE-TRIP AND DAILY VEHICLE INSPECTIONS
PERFORM DAILY AT THE BEGINNING OF EVERY WORK PERIOD