B-4 / © 2020 Pierce Manufacturing Inc. All Rights Reserved.
B-2.3 Tar, Rust or Other Containment Removal
• Tar removal can be done with Naphtha thinner applied with soft tissue or with a commercially available tar
remover (follow product manufacturer’s instructions).
• Rust and tarnish removal can be cleaned away with a special mixture of 1 part laundry detergent, 1 part
kerosene, and 1 part lukewarm water.
B-2.4 Chrome Cleaning
• Wash chrome parts using mild soap and water, with a clean non-abrasive towel.
• After washing, rinse with water and hand dry chrome parts.
• If needed, apply a soft non-abrasive chrome polish.
• Never use any products that scratch or chemicals that are abrasive, as this will dull the chrome finish.
• Do not use any acid or hydrozide based chemicals.
B-2.5 ABS Plastic and Clear LEXAN Component Care
1. Wash with a mild solution of soap or detergent and lukewarm water.
2. Using a soft cloth or sponge, gently wash the sheet to loosen dirt and grime and rinse well with water.
3. To prevent spotting, thoroughly dry with chamois or cellulose sponge.
4. Avoid the use of abrasive cleaners and/or cleaning implements, such as brushes that may mar or gouge the
coating.
To Next Page
Loading...
