Pilz PNOZ m1p User Manual

Overview
Operating Manual PNOZ m1p (ETH)
20878-EN-16
7
2 Overview
2.1 Range
} Base unit PNOZ m1p
} Terminator
} Documentation on data medium
2.2 Unit features
Application of the product PNOZ m1p:
Base unit from the configurable control system PNOZmulti
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Positive-guided relay outputs:
– 2 safety outputs
Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of
EN IEC 62061
} Semiconductor outputs:
– 4 safety outputs
Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of
EN IEC 62061
– 1 output for standard applications
} 4 test pulse outputs
} 1 cascading input and output;
can also be used as a standard output
} 20 inputs for connecting, for example:
– E-STOP pushbuttons
– Two-hand pushbuttons
– Safety gate limit switches
– Start buttons
– Light beam devices
– Scanners
– Enabling switches
– PSEN
– Operating mode selector switches
– Safety mats
} Muting function

Pilz PNOZ m1p Specifications

General

Supply Voltage	24 V DC
Number of Safe Inputs	20
Number of Safe Outputs	8
Number of Standard Outputs	4
Protection Type	IP20
Expansion Modules	Yes
Safety Category	EN ISO 13849-1: PL e
Communication Interface	Ethernet
Operating Temperature Range	-20°C to +60°C
Dimensions (W x H x D)	45 mm x 121 mm
Standards	EN ISO 13849-1, EN 62061, EN 61508