To Next Page
L
Lori RushAug 26, 2025
What does SIM Card Fault mean on Pima Security System?
- ZZachary MoodyAug 26, 2025
If your Pima Security System shows 'SIM Card Fault', it means the SIM card is not detected or is faulty.
What does SIM Card Fault mean on Pima Security System?
If your Pima Security System shows 'SIM Card Fault', it means the SIM card is not detected or is faulty.
What does Zone Fault mean on Pima Security System?
If the Pima Security System displays a 'Zone Fault', it means a zone (including a wireless zone) is tampered with or faulty, indicating possible tampering!
What does Wireless Z Fault mean on Pima Hunter-Pro 832?
If your Pima Security System displays a 'Wireless Z Fault', it means a wireless detector (zone) is faulty because there is no supervision signal.
What does GSM Link Fault mean on Pima Hunter-Pro 832 Security System?
If your Pima Security System shows 'GSM Link Fault', it indicates limited or no GSM reception.
What does Network Fault mean on Pima Hunter-Pro 832 Security System?
If your Pima Security System displays a 'Network Fault', it means there is a network communication issue with the Central Monitoring Station.
What does KEYPAD NOT CONNECTED mean on Pima Hunter-Pro 832 Security System?
If your Pima Security System displays 'KEYPAD NOT CONNECTED', it means there is no communication between the keypad and the control panel.
What does MS COM Fault mean on Pima Hunter-Pro 832?
If your Pima Security System displays 'MS COM Fault', it means there is a failure to communicate with the Central Monitoring Station over the phone.
What does GSM Comm. Fault mean on Pima Security System?
If your Pima Security System displays 'GSM Comm. Fault', it means there is a GSM communication failure with Central Monitoring Station #1.
What does GSM Comm. 2 Fault mean on Pima Hunter-Pro 832?
If your Pima Security System displays 'GSM Comm. 2 Fault', it indicates a GSM communication failure with Central Monitoring Station #2.
What to do if Pima Hunter-Pro 832 shows a low battery?
If the Pima Security System displays a 'Low Battery' message that lasts more than one day, or if there hasn't been a power failure, it's recommended to call a service technician. This issue may occur after a prolonged power failure or if the battery is old.
General| Brand | Pima |
|---|---|
| Model | Hunter-Pro 832 |
| Category | Security System |
| Language | English |
Overview of the combined features of Hunter-Pro and Captain 8 alarm systems.
Detailed features exclusive to the Hunter-Pro Series models.
Highlights of the distinctive features of the Captain 8 model.
Information clarifying the distinctions of the Lite versions.
Essential safety and security precautions for system installation and use.
Details on system codes including Master, User, Short, and Duress codes.
Explanation of the Master code's role and access authorizations.
Information on setting up user codes, authorizations, and event logging.
Description of the 2-numeral short code used exclusively for arming.
Guidance on the Duress code for silent alarms in distress situations.
Instructions on how to access and operate the User menu for system settings.
Description of PIMA's LCD keypads: RXN-400, RXN-410/RFID, and RXN-800.
Methods available for arming the alarm system.
How to arm the system using codes via the keypad.
Explanation of how exit and entry delay zones function.
Instructions for quickly arming the system to Full mode.
Procedures for disarming the alarm system.
How to disarm the system using the Duress code.
Options for filtering and viewing different types of events in the log.
Steps for bypassing zones when arming the system.
How to bypass zones before initiating the arming process.
Procedure to reactivate zones that were previously bypassed.
Quick methods for arming the system in Home 1 and Home 2 modes.
Detailed explanation of the fast 32-zone display for zone status.
How to scan and view open zones and the system's status.
Procedure to turn off the display of zone statuses.
Overview of other available display types for system information.
How to display comprehensive information for all programmed zones.
How to view information related to bypassed zones.
Information on viewing zones currently in soak test mode.
How to view zones configured for chime alerts.
Displaying the current status of all programmed zones.
Method to display the names assigned to system partitions.
Procedure for setting phone numbers for receiving alerts and messages.
Configuration options for receiving SMS alerts from the system.
How to perform a test of the system's dialer and phone numbers.
Details on setting and managing the system's Master code.
General procedures for managing user codes.
Instructions on how to add new user codes or modify existing ones.
Procedure for removing user codes from the system.
How to assign custom names to user codes.
Setting user permissions, access levels, and other preferences.
Defining specific hours during which users can disarm the system.
How to grant users control over specific partitions.
Procedure for assigning key fobs to individual users.
Procedure for unassigning key fobs from users.
Procedure for assigning RFID tags or keychains to users.
Procedure for unassigning RFID tags or keychains from users.
Instructions for setting and using Duress codes.
Steps for setting the 2-numeral short code for arming.
How to configure door codes for access control.
How to set specific zones to trigger the keypad chime.
Procedure to turn the chime function on or off for all zones.
How to silence the keypad chime function.
Setting up the system to arm automatically at scheduled times.
Configuring automatic arming based on periods of inactivity.
Explanation of partitions and their role in system management.
Examples demonstrating various partition configurations.
How to view the status of partitions that are currently armed.
Methods for arming the system using accessories like key fobs and RFID tags.
Specific instructions for arming the system using a key fob.
How to allow remote programming access for technicians.
Guide to entering characters using the keypad, similar to mobile phones.
Instructions on how to trigger a panic alarm.
Specific settings and configurations for the RXN-800 keypad.
Procedures for resetting detectors after they have been activated.
Comparison of features between Hunter-Pro 832 and 8144 models.
Comparison of features between Hunter-Pro and Captain 8 systems.
Instructions on how to conduct system tests using the BACK key.
Overview of basic remote control functions via phone.
Advanced remote control functions, including output activation.
Practical examples demonstrating remote control operations.
