Pima Hunter-Pro 832 - Key #9: User Code Management; Master Code Configuration; User Code Management Overview; Adding or Changing User Codes

Key #9: Codes
21
9. Key #9: Codes
Codes in the Hunter-Pro Series and Captain 8 systems are made of 4-6 numerals (except for the
Short code). Duplicate codes or codes that start with same two numerals as the Short code are
not allowed. All codes are concealed with asterisks and cannot be revealed or restored in any way.
9.1 Master code
 Master code    4-6 numerals
number 
The Master code is a super user code, with all access authorizations. See section 1.6.1, on page 7
for more details. The “Master code” menu is visible only when entering the User menu with the
Master code.
Make sure to change the default code during the installation.
9.2 User codes
9.2.1 Add/change
 Master code    User
number OR  to the next user  
 4-6 numerals 
Users can enter the User menu in the following way:
  User code. You can limit users in several ways using the ‘User settings’ menu. See
section 9.2.4 below.
For details about user codes, see section 1.6.2, on page 7.
An asterisk (*) to the right of the user’s name, notes the user code has been assigned to this
user. For example, “Linda” is the user number 16:
9.2.2 Delete
 Master code   
User number   
Once a code is deleted, the asterisk will disappear.
9
CODES
Master Code
ENTER/NEXT/END
ENTR
Master Code
****** (4-6)
ENTR
9
CODES
NEXT
User Codes
ENTER/NEXT/END
ENTR
User 1 (1)
ENTER/NEXT/END
NEXT
ENTR
Entr/Change Code
ENTER/NEXT/END
ENTR
User 1
****** (4-6)
ENTR
Linda (16 ) *
ENTER/NEXT/END
9
CODES
NEXT
User Codes
ENTER/NEXT/END
ENTR
User 1 (1) *
ENTER/NEXT/END
ENTR
NEXT
Delete Code
ENTER/NEXT/END
ENTR
Code deleted
Press END
END