Pima Hunter-Pro 832 - Setting User Disarming Time Windows; Assigning Users to Partitions

Key #9: Codes
23
9.2.5 Disarming window of time
 Master code   user number   X4
  start and end times, in the following
format: hh:mm 
  / to correct data.
This useful feature allows you to limit users so they can disarm the alarm system only in defined
hours. If a user tries to disarm the system in any other time, the message “Access Denied! Press
END” is displayed and the system remains armed.
For example, the user “James D.” can disarm the system only between 07:30-09:30 am:
9.2.6 User partitions
 Master code   user number   X5
 :
in Hunter-Pro Series
in Captain 8 
 Set to which partitions the user will be assigned to 
  / to move to the left and right.
  to assign the user to a partition (set to “+”), or cancel its assignment (set to “-”).
  to save.
Setting a letter to “+” means, the user is authorized to arm and disarm that partition.
The partition’s number is printed on the keypad, below the screen.
There can be up to 16 partitions in Hunter-Pro Series, and 4 in Captain 8. See section 12.1, on
page 28 for details about partitions.
To enable a user to control its partitions from any keypad (and not just the keypads that are
assigned to the same partition he is assigned to), see parameter “K” in the “User Settings”,
section 9.2.4, page 22.
9
CODES
NEXT
ENTR
ENTR
NEXT
Disarm Window
ENTER/NEXT/END
ENTR
User 1
00:00 To 23:59
ENTR
NEXT
BACK
9
CODES
NEXT
ENTR
ENTR
NEXT
Partitioning
ENTER/NEXT/END
ENTR
Part. For User1
++++++++++++++++
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Part. For User1
++++
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ENTR
NEXT
BACK
ENTR