Pima Hunter-Pro 832 - Removing RFID Tags;Keychains from Users; Setting Up Duress Codes; Configuring Short Codes; Setting Door Codes

Key #9: Codes
25
9.2.10 Delete RFID Tag/keychain
 Master code   user number   X9
 
9.3 Duress code
 Master code   X2 
4-6 numeral number 
The code is a 4-6 numeral number. Tip: use your Master code but switch around the last 2 numerals.
For more details on the Duress code, see section 1.6.4, on page 7.
9.4 Short code
 Master code   X3  
2-numeral number 
The Short code is a 2-numeral code for arming only. Entering the code sets off the Exit delay,
after which the system is armed.
9.5 Door code
 Master code   X4  
4-6 numeral number 
The door code is mainly used for opening electric doors, gates, etc.
9
CODES
NEXT
ENTR
ENTR
NEXT
Delete TAG ?
ENTER/NEXT/END
ENTR
Tag Removed!
Press END
END
9
CODES
NEXT
Duress Code
ENTER/NEXT/END
ENTR
Duress Code
****** (4-6)
ENTR
9
CODES
NEXT
Short Code
ENTER/NEXT/END
ENTR
Short Code
**
ENTR
9
CODES
NEXT
Door Code
ENTER/NEXT/END
ENTR
Door Code
****** (4-6)
ENTR