Pima Hunter-Pro 832 - Remote Control Usage Examples

Hunter-Pro Series & Captain 8 User Guide
36
13.2.1 Examples
Activate the external siren output:
Dial the system’s phone number  the panel picks up the call  wait for the confirmation tone to
end  dial the Master code  wait for command confirmation tone to end  dial
*
11
Deactivate Relay#2 in I/O-R #2:
Dial the panel’s phone number  the panel picks up the call  wait for the confirmation tone to
end  dial the Master code  wait for command confirmation tone to end  dial #60.