Pima Hunter-Pro 832 - Adding Key Fobs to User Accounts; Removing Key Fobs from User Accounts; Adding RFID Tags;Keychains to Users

Hunter-Pro Series & Captain 8 User Guide
24
9.2.7 Add key fob
 Master code   user number   X6
  press one of the key fob’s buttons ....

The key fob is assigned per user, so any use of it is logged under the user code. The letter “K” in
the user code screen indicates that the User has a key fob assigned to it. For example, Martha is
assigned with a key fob:
The use of the key fob is subject to the user’s settings. See section 9.2.4.
For more details on key fobs, see section 12.2.
9.2.8 Delete key fob
 Master code   user number   X7
 .... 
9.2.9 Add RFID tag/keychain
 Master code   user number   X8
 place the keychain or tag near the left
side of the RFID keypad (see the next image), until a confirmation message “TAG Received! Press
END” is displayed 
The letter “A” in the user code screen indicates that an RFID tag/keychain is assigned to that
user. For example,
To force the user to enter its code when it disarms the system using an RFID tag/keychain, see
the “User Settings” in section 9.2.4, on page 22.
9
CODES
NEXT
ENTR
ENTR
NEXT
Add keyfob?
ENTER/NEXT/END
ENTR
Add keyfob?
Activate device
Device added!
Press END
END
Martha (15 )K*
ENTER/NEXT/END
9
CODES
NEXT
ENTR
ENTR
NEXT
Delete keyfob?
ENTER/NEXT/END
ENTR
Delete keyfob?
Please wait..
Device deleted!
Press END
END
9
CODES
NEXT
ENTR
ENTR
NEXT
Add RFID tag?
ENTER/NEXT/END
ENTR
Pls. Attach tag
END
Tina (1 )A*
ENTER/NEXT/END