Pima Hunter-Pro 832 - Hunter-Pro

2
Quick Reference Guide – The keypad keys
Key
Enter Master code and press the key to...
Press the key for 2 seconds

to...
1
Arm to Full mode, disarm
Quickly arm to Full mode*
2
Display the log (event memory)
-
3
Bypass zones temporarily
-
4
Arm to “Home 1” mode
Quickly arm to “Home 1” mode*
5
Display modes menu
Display the “All Zones” mode for a minute
6
Set the telephone numbers
-
7
Arm to “Home 2” mode
Quickly arm to “Home 2” mode*
8
Set time and date
-
9
Set user codes
-
*
Set zone chime
Turn ON/Off the chime for chime zones
0
Set auto-arming by day and inactivity
-
#
-
 Reset smoke detectors
 Press briefly: display armed partitions
END
Press: cancel, return
Silence the chime at faults
NEXT
 Display the system’s name & version
 In programming mode: moves the cursor to the right
Display the service provider
BACK
 Initiate system tests
 In programming mode: moves the cursor to the left
-
ENTER
In programming mode: enter/select, save changes
Display the system’s name & version
* + #
 Press and hold for 2 seconds: generate Panic alarm
 In programming mode: enable (‘+’) or disable (‘-’) parameter, delete
ENTER +
END
Press briefly: turn ON/OFF the keypad chime
The numerals imprinted above and below the LCD screen are zone numbers (above & under) and partition numbers (under).

Commands marked with an asterisk must be enabled by the Installer.