Pima Hunter-Pro 832 - Key #2: Event Log Functionality; Event Log Viewing Options

Key #2: Event Log
11
3. Key #2: Event Log
The system logs alarms, arming & disarming events, zone bypassing, faults, code changing and
other actions, chronologically. Any action taken by any user is logged with its user name.
Part of the log is non-volatile (see the table on page 32).
The log screen can display all the events ( ‘0’), or only faults ( ‘1’), alarm events
( ‘2’) and arming/disarming events  (‘3’). To switch between types, press the corresponding
number in each screen.
A log entry shows the date & time stamp of the event on the top line, and the event’s details on
the bottom line.
Press / to move between entries.
Press / to advance/move back 10 entries.
Example for zone alarm entry
A “Burglary” alarm in zone #4, named “Kitchen”. The zone name is displayed intermittently with
the alarm type and zone no.
3.1 View options
All Events-0
 Master code   
Faults Only-1
 Master code  
Zone Alarms-2
 Master code  
…..
Arming/Dis.-3
 Master code   
BACK
*
#
124)22 NOV 16 04:35
Burgl Alarm 17
124)22 NOV 16 04:35
Garage door
Time stamp
Alarm type Zone no. Zone name
~
Serial no.
Show:
All Events-0
ENTR
71) 14 APR 16 13:28
User 8 -Disarming
Show:
Faults Only-1
ENTR
87) 2 AUG 16 07:51
AC Voltage Fault
Show:
Zone Alarms-2
ENTR
124)22 NOV 16 04:35
Burgl Alarm 17
124)22 NOV 16 04:35
Garage door
Show:
Arming/Dis.-3
ENTR
71) 14 APR 16 13:28
User 8 -Disarming