Pima Hunter-Pro 832 - Key #5: Displaying System Information; Fast 32-Zone Display Mode

Key #5: Displaying Types
15
6. Key #5: Displaying Types
 Master code   
  
  
Your keypad has few options for displaying information on zones
6
, alarms, faults etc. There are
two basic displaying types: single screen, and scrolling. Other types display various information for
a minute, before they return to one of the basic types.
6.1 Fast 32-zone display
 Master code  
This display type is best used in systems with up to 32 zones (detectors), each line can display up
to 16 zones. The zone’s status is represented by different characters.
The numbers above and below the LCD screen, represent zone numbers. See the image below.
Figure 2. “Fast Zone” mode with 16 zones
The system characters on the top line are:
Char.
Description
P
The system is communicating or testing the phone line
T
The system is communicating over the Radio
R
The Relay output is active
S
The Siren output is active
The zone status indicators are:
Char.
Description
-
Closed (not triggered) zone
_
Open (triggered) zone. If the zone has more than one active indicator (the zone
is open and alarming, for example), the indications are displayed intermittently.
A
The zone is alarming (it is open or was violated when the system was armed)
6
Zone names are programmed by the Installer.
Display Type:
Fast Zn. Display
NEXT
Display Type:
Scan Open Zones
NEXT
Display Type:
Disable Zn. Disp
NEXT
Display Type:
All Zones
NEXT
Display Type:
Display Bypass Z
NEXT
Display Type:
Display Soak Zn.
NEXT
Display Type:
Display Chime Zn
NEXT
Display Type:
All Zones Status
NEXT
Display Type:
Show Part Name
Display Type:
Fast Zn. Display
ENTR