To Next Page
C
carolyn75Sep 3, 2025
What does Int. siren fault mean on Pima Hunter-Pro 832?
- DDouglas AustinSep 4, 2025
If your Pima Security System displays 'Int. siren fault', it means the internal siren is faulty.
What does Int. siren fault mean on Pima Hunter-Pro 832?
If your Pima Security System displays 'Int. siren fault', it means the internal siren is faulty.
How to fix a phone line fault on my Pima Hunter-Pro 832?
If your Pima Security System displays a 'Phone Line Fault', perform a phone line test. Ensure no other telephone appliance is using the line. If the fault persists, call a service technician.
What should I do if my Pima Security System indicates a low voltage?
If the Pima Security System displays a 'Low Voltage' message, it usually appears before the backup battery is completely discharged, often during a prolonged power failure. It's recommended to call a service technician immediately!
What does 'W/L Unit Tamper' mean on my Pima Security System?
A 'W/L Unit Tamper' message indicates that the I/O-WN box tamper is open or faulty.
What does 'IO-R X Batt' mean on my Pima Hunter-Pro 832?
The message 'IO-R X Batt' indicates that IO-R X has a low battery.
What does 'Wireless Z Fault' mean on my Pima Security System?
A 'Wireless Z Fault' indicates that a wireless detector (zone) is faulty, meaning there is no supervision signal.
What does Detec Vol. Fault mean on Pima Security System?
If your Pima Security System displays 'Detec Vol. Fault', it indicates that the detector voltage is faulty due to possible tampering! It's recommended to call a service technician immediately!
What does IO-R X Fault mean on Pima Hunter-Pro 832?
If your Pima Security System displays 'IO-R X Fault', it means that the I/O-R relay expander is faulty.
What does 'IO-R X Voltage' mean on my Pima Hunter-Pro 832?
The message 'IO-R X Voltage' indicates low voltage in the I/O-R relay expander.
What does KEYPAD NOT CONNECTED mean on Pima Hunter-Pro 832 Security System?
If your Pima Security System displays 'KEYPAD NOT CONNECTED', it means there is no communication between the keypad and the control panel.
General| Brand | Pima |
|---|---|
| Model | Hunter-Pro 832 |
| Category | Security System |
| Language | English |
