HUNTER-PRO Series Installation Guide 61
5.5.7 SMS Settings
3 ENTR ENTRNEXT
X7
Communication
ENTER/NEXT/END
SMS Settings
ENTER/NEXT/END
System Name-SMS
Alarm System
Set a name to identify the system in SMS reports. A name can be the customer’s name
or any other. “Alarm System” is the default name.
5.5.7.1 A demo cell phone SMS message
System’s name for SMS
Event type and zone no.
Time of alarm/event
Zone name
Date of alarm/event, as
registered in memory log
The text and time for the SMS messages is taken from the
system’s memory log
For further SMS definitions, refer to section 5.5.12.2
5.5.8 Serial Output
3 ENTR ENTRNEXT
X8
Co mmunication
EN TER/NEXT/END
Serial Output
ENTER/NEX T/END
LNLN
____
ENTR
Lcl.Mon.Interv al
5 Se conds
Set the serial output use, regarding the connection to the MS. The MS can be
connected locally, using RS-232 cable, or remotely, through the net4pro IP interface. It
can use a home automation (“Smart home”) or PIMA proprietary protocol.
Par. Name Marking “+” means the device is…
L Home Automat. 1 MS1 uses Home automation
*
/Building management protocol
N Network MS MS1 uses PIMA’s proprietary protocol
L Home Automat. 2 MS2 uses Home automation
*
/Building management protocol
N Network MS MS2 uses PIMA’s proprietary protocol
*
Known also as “Smart home”
Home
Burgl Alarm 2
TV room
11:35
15
To Next Page
Loading...
