HUNTER-PRO Series Installation Guide 33
Figure 30. LCD keypad without back cover
1. If keypad supervision is not required, the number of keypads
connected to the system (see section 5.3.4) and all keypads’ IDs
should be set to zero
2. Up to 8 keypads can be connected to the system, whether they
are supervised or not
3.9 Telephone Line and Devices
The system should be the first device connected to the telephone line (through the
LINE terminals). Other devices (telephone set, answering machine, etc.) need to be
connected to the SET terminals to enable “line snapping”.
When alarm occurs, these devices will be disconnected so the system can dial and
receive calls. When calls are over the line will be reconnected to the SET terminals.
Figure 31. Telephone connections
3.10 VKD-1: Virtual Keypad
VKD-1 is PIMA’s software for creating a virtual LCD keypad and connecting it to any
PIMA control panel, locally (via cable) or remotely, via the internet. With VKD-1 you
can view and control the system just as if you use a real LCD keypad connected to the
system.
To Next Page
Loading...
