HUNTER-PRO Series Installation Guide 15
CH. 2. PARTITIONING
2.1 Introduction
A partition is a sub-division of the system, made of several zones. By using partitions
you can control user access authorizations. Each partition can be controlled by one or
more keypads and a user can be given a code that will allow him to control only a
specific partition in a specified time frame.
HUNTER-PRO series can have up to 16 partitions and 8 keypads (i.e. monitored
keypads). A keypad can control one or more partitions.
2.2 Examples
2.2.1 Example A
Figure 2. Implementing partitions - Example A
In example A, keypad 1 controls all 3 partitions and is used by all 3 users.
2.2.1.1 Common Application for Example A
Figure 3. An office facility divided into rooms/partitions
A floor in an office building has 16 rooms. Each room is programmed as a partition and
can have different User Codes/Remote Controls/TAGs for arming/disarming the system.
A single keypad is installed at the entrance of the hallway. In this case, the keypad will
display the entire system’s status.
Partition 1
Partition 2
Partition 3
Keypad 1
Users 1, 2, 3
To Next Page
Loading...
