Pima Hunter-Pro 832 - Scanning Open Zones; Disabling Zone Status Display; Alternative Display Types

16 HUNTER-PRO Series Installation Guide
A detector located next to the entrance and allocated to all partitions protects the
entrance, as soon as all partitions are armed. This zone will be unarmed as soon as the
first partition is disarmed.
2.2.2 Example B
......
.....
.....
Figure 4. Implementing partitions - Example B
The system is divided into X partitions, each partition is controlled by its keypad/s
(defined in “System Installation/Keypads Setup/Partitions for RKD”). A User Code has
access authorizations based on partition/s (defined in User Menu/Code/User
Codes/Partitioning), e.g. User 1 can only activate Partition 1 & 5. That implies for
arming/disarming too.
A keypad displays the status of its authorized partition’s only.
2.2.2.1 Common Application for Example B
Figure 5. Common application for partitions
An office building is divided into 4 departments with different entrances and different
working hours:
Control Panels (up to 8 monitored)
Partitions
(
u
p
to 16
)
Users (up to 96)
Control Panel 1
Partition 1
User 1
Control Panel 2
Control Panel 3
User 2 User 3
Partition 2
Partition 3
Keypad 3:
Management
floo
r
Keypad 2
:
Production
floo
r
Keypad 1
:
Storage (part of
1
st
floor
)
Keypad 4
:
S
tore
(part of 1
st
floor)
Part. 3
Part. 2
Part. 1
Part. 4