96
PDP-433CMX
1234
C
D
F
A
B
E
1
23
4
Items Initial Setting Remarks
Key input of the remote control unit
Power supply (STANDBY/ON) NO CARE
Input function INPUT1
Screen size
VIDEO WIDE (When the video signal is input) For each input function
PC
1 DOT BY DOT
(When the PC signal is input) For each input function and signal
mode
Priority is 1 → 2 → 3
2 4 : 3 (including TYPE)
3 FULL (including TYPE)
Vertical position adjustment (V scroll) 0 For each input function (at VIDEO)
KEY LOCK UNLOCK
Common to all input functions
VOLUME 0
User menu settings
PICTURE
Default value for all adjustment items
For each input function and signal mode
SCREEN
Default value for all adjustment items
For each input function and signal mode (at PC)
INPUT LABEL &INPUT∗& (∗: 1 to 5). For each input function
AUTO POWER OFF OFF For each input function
POWER MANAGEMENT OFF INPUT1 (at PC) /5
COLOR TEMP MIDDLE
For each input function (at VIDEO)DIGITAL NR LOW
HIGH CONTRAST OFF
PURECINEMA OFF For each input function (at 525i (NTSC))
COLOR SYSTEM AUTO For each INPUT3/4
CLAMP POSITION AUTO For each INPUT1/2
3D Y/C MODE MOTION INPUT 4
SETTING
VGA (at mode03, 31, E1)
For INPUT 1/2XGA (at mode61, 71, 63, 73)
VIDEO SIGNAL RGB
POWER CONTROL STANDARD (VIDEO/PC) Common to all input functions
AUTO FUNCTION OFF
Common to all input functions
AUDIO OUT FIXED
Integrator menu setting item
PICTURE
Default value for all adjustment items
For each input function and signal modeWHITE BALANCE
Default value for all adjustment items
SCREEN
Default value for all adjustment items
2×2 MODE OFF/Upper left
For each input function
BRT. ENHANCE
VIDEO OFF
PC OFF For each function that can be controlled by the PC
HDTV MODE 1035i Common to all input functions
VIDEO INPUT
COMPONENT1 750p/1125i/1125p
COMPONENT2 525i/525p/625i/625p
SUB VOLUME 60 For each input function
OSD ON
Common to all units
BAUD RATE 4800BPS
TIMER OFF/1/0.0/WHT
(Setting/Timer time/Mask time/mask color)
Common to all input functions
FINAL SETUP Details
To Next Page
Loading...
Need help?
General