129
Before Beginning Adjustments
3) Integrator Mode
PICTURE CONTRAST 0 to 255 (Note 8) ???????
BRIGHT 0 to 255 (Note 8) ???????
COLOR 0 to 255 (Note 8) ??? ?
TINT 0 to 255 (Note 8) ??? ?
H.ENHANCE 0 to 15 0, 2 (Note 9) ???
V.ENHANCE 0 to 15 0, 2 (Note 9) ???
H.SHARP 0 to 15 8 ??? ?
V.SHARP 0 to 15 8 ??? ?
WHITE R.HIGH 0 to 255 (Note 8) ???????
BALANCE G.HIGH 0 to 255 (Note 8) ???????
B.HIGH 0 to 255 (Note 8) ???????
R.LOW 0 to 255 (Note 8) ???????
G.LOW 0 to 255 (Note 8) ???????
B.LOW 0 to 255 (Note 8) ???????
SCREEN H.POSITION 0 to 255 128 ???????
V.POSITION 0 to 255 128 ???????
CLOCK 0 to 255 128 ?
PHASE 0 to 63 32 ?
V.SIZE 0 to 127 0 ???????
SET UP 2X2 OFF – ON (Note 2) OFF % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1)
LAYOUT
UP LEFT – DOWN LEFT
UP LEFT % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1) % (Note 1)
– UP RIGHT – DOWN RIGHT
BRT.ENHANCE OFF – ON OFF % (Note 2) % (Note 2) % (Note 2) % (Note 2) % (Note 2) % (Note 2) % (Note 2)
HDTV MODE 1035i – 1080i 1035i % (Note 3) % (Note 3)
VIDEO INPUT
COMPONENT1
(Note 4) ?
– COMPONENT 2
SUB VOLUME 0 to 60 60 ???????
OPTION OSD ON – OFF ON ?
(Note 5)
BAUD RATE
4800 – 9600 – 19200
4800 ?
– 38400 – 1200 – 2400
TIMER OFF – ON (Note 6) OFF ?
DISPLAY TIME
1 to 24 1 ?
MASK TIME
0.0 to 9.5 0.0 ?
MASK WHITE – RED
WHITE ?
COLOR – GREEN – BLUE
FULL MASK
OFF
– WHITE
– RED
OFF (Note 6)
– GREEN – BLUE
R.LEVEL 0 to 255 80 ?
G.LEVEL 0 to 255 80 ?
B.LEVEL 0 to 255 80 ?
MASK CONTROL ON
– OFF ON ?
ORBITER MODE OFF
– ON OFF ?
INVERSE MODE OFF
– ON OFF ?
COLOR MODE MODE1
– MODE2 MODE1 ?
MIRROR MODE
OFF
–
X
–
Y
–
XY
(Note 1) OFF ?
FAN CONTROL AUTO
– MAX AUTO ?
MONITOR NAME Max. 12 letters &&&
PLASMA
&&& ?
ID NO.SET – –, 00 to FF – – ?
SLOT INPUT
VIDEO(RGB)
VIDEO RGB
– COMPONENT1
– COMPONENT2
TEMPERATURE Only display
HOUR METER Only display
Variable Range
(STEP)
Factory
Preset
PDP-503CMX/503MXE
and PDP-433CMX/433MXE
INPUT1, 2
Video Signal Video Signal
PC Signal
Video Signal
Analog
RGB
S-Video
Component
RGB
PC Signal
INPUT3 INPUT4 INPUT5
PDA-5002
Video cards other than
the PDA-5002
INPUT3 to 5 INPUT3 to 5
Video Signal
PC Signal
Composite
Digital
RGB
2X2
MODE
OFF
TIMER
SIDE
MASK
% (Note 7)
?
Digital
RGB
(Note 1) During MIRROR MODE operation (X, Y, XY time), 2X2 MODE does not
operate: only its setting can be changed. (MIRROR MODE has priority.)
(Note 2) During 2X2 MODE operation (ON time), BRT ENHANCE does not
operate: only its setting can be changed. (2X2 MODE has priority.)
(Note 3) HDTV MODE can be set only when a 1125i/60Hz signal is input.
(Note 4) When a 1125i/1125p/750p signal is input, COMPONENT1 is set, and
when a 525i/525p/625i/625p signal is input, COMPONENT2 is set.
(Note 5) OPTION is set for all inputs.
(Note 6) During display of the OFF TIMER mask, FULL MASK does not operate:
only its setting can be changed. (OFF TIMER has priority.)
(Note 7) SLOT INPUT can be set only when a video card other than the PDA-
5002 is installed.
(Note 8) There are cases where this varies according to each setting. And in
some cases, it varies according to color mode.
(Note 9) It is “2” only during UXGA signal input.
To Next Page
Loading...
Need help?
General