Operation
Main unit
When optional speakers have been connected,
the operation panel on the main unit will not be
operable
Main unit _ MENU button
_1 _
_1_'Main power switch
Use to switch the main power of the unit on and off,
_2_STANDBY/ON indicator
This indicator is red during standby mode, and turns
to green when the unit is in the operation mode
(page 20),
Press to open and close the on-screen menu (pages
17 to 38)
_ ADJUST (A/W/4/I_) buttons
Use to navigate menu screens and to a_ust various
settings on the unit.
Usage of cursor buttons within operations is clearly
indicated in the on-screen display (pages 17 to 38)
_39Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 50)
_ SET button
Press to adjust or enter various settings on the unit
(pages 17 to 38),
Operation panel on the main unit
_} S.MODE button
Press to manually select the screen size (page 22)
(4) _ STANDBY/ON button
Press to put the display in operation or standby mode
(page 20),
60) RETURN button
Press to reset the unit to factory set defaults
(page 49)
_5}_iNPUT button
Press to select input (page 20),
<ARE1"/49 > Er/
To Next Page
Loading...
