Adjusting the ce_ertemperature ef
the screen (COLORTEMP)
This function enables the video image to be set to one of
five different tones,
cH _ _OL
2,3,4,5
3 Press A/V to select OTHER, then press
SET/SELEC_
4 Press A/V to select COLOR TEMP, then press
SET/SELECT.
J
1 Press MENU to display the menu screen.
The menu screen appears
2 Press A/V to select PICTURE then press
SET/SELECT.
5
Press </l_ to select COLOR TEMP setting.
Select the color temperature setting that best
matches your preferences and viewing environment,
• NEWS: Causes the colors displayed to appear in
cooler hues than those in LIVE
• LIVE: Causes the colors displayed to appear in
cooler hues,
• STD: Causes the colors displayed to appear in
normal hues,
• FILM: Causes the colors displayed to appear in
warmer hues,
• B&W: Causes the colors displayed to appear in
warmer hues than those in FILM
If the setting is changed from "STD', it is saved to
the USER mode setting (page 30),
After selecting, press SET/SELECT to enter your
selection
6 When the setup is finished, press MENU to exit
the menu screen.
Note
"STD" is set when this unit is shipped from the factory
<ARE1349 > En
To Next Page
Loading...
