About the input jacks this unit
Connection to INPUT1
Connect the output jacks of components to the input
jacks of this unit following the list below (pages 10 to 14),
In ut of
Connected
component
andsignals
AV component
INPUT1 INPUT2 INPUT3 .1 INPUT4 .1
Composite video
S video
Component video
RDB
Personal computer
(PC)
Composite video
S video
RDB
Connect an AV component that has a video or S-video
output jack to the INPUTljacks on the main unit, It is
possible to use both the VIDEO and S-VIDEO jacks of
INPUT1 at the same time for the connection, However, if
simultaneous signals are received, the S-video signal is
given priority,
PLIItlL
"1 Although INPUT3 and INPUT4 are compatible with various
kinds of signals, setup using the on screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 17 to ] 9)
*2 INPUT4 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B) INPUT3 is not compatible with this
*3 Depending on the video output board of the compute[, this
type of connection may not be possible
AV component
If necessary, use the Pin/BNC conversion adapte_ to
make connections,
CeHnection te INPUT2
Connect an AV component that has component video
output jacks to the C-VIDEO input jacks on this unit Be
sure to match the colors of the component cable plugs
with the colors of the jacks on both components,
®®@
y c,/i,,, c,</ i,,,
ii_J >LII 2
AV component
FOr the screen sizes and input signals that INPUT1 and_
INPUT2 a_e compatible with, please _efer to
J
upplement 1 (page 55)
<ARE1349 > En
To Next Page
Loading...
