Remete ¢ent emuni
This unit incorporates the use of a "learning" remote
control unit This page describes the buttons and controls
directly connected with the functioning of the main panel
unit For more information about how this remote control
can be used in conjunction with your othe_ components,
please refer to the sections "Remote code set up" on
page 39 and "Remote control unit functions" on page 42"
switch
@
m_
@
_1_,(_ STANDBY/ON button
Press to put tile urfit in operation ol standby mode
(page 20)
q2],INPUT buttons
Use to select the input (page 20)
' 3 _SCREEN MODE button
Press to manually select the screen size (page 22)
(4) AUTO SCREEN button
Use for automatic selection of screen size (page 23),
_5_ MENU button
Press to open and Close the on-screen menu
(pages 17 to 38)
_ ADJUST (A/V/</1_) buttons
Use to navigate menu screens and to adjust vadous
settings on the unit
Usage of cursor buttons within operations is clearly
indicated at the bottom the on-screen menu display
(pages 17 to 38)
_ Light button
When this button is pressed, all the buttons on the
remote control unit will light The lighting will turn off
if no operations are performed within five seconds,
This button is used for performing operations in dark
places,
_ DISPLAY button
Press to view the unit's current input and setup mode
(page 21),
_ STILL button
Use to freeze the image currently displayed on the
screen (page 21),
_0) SET/SELECT button
P_ess to adjust o_ enter various settings on the urfit
(pages 17 to 38)
Notes
the mode switch of the remote control unit to "TV/VCR" (]he
remote control unit operates this unit only when the mode
switch is set to "TV/VCR".)
• This page covers only buttons that operate this unit Buttons
that are not covered on this pageare used to operate other
devices (pages 39to 48)
To Next Page
Loading...
