Viewing a fast moving picture
(3Dwc LEVEL)
When viewing a fast moving picture such as might be
experienced with a sports program, setting this mode to
an appropriate level as determined by the video source
will reduce picture blur, and produce a clearer image,
• This setting can be adjusted along 5 points with "1 "
recommended for viewing sources with a let of action
and "5" recommended when viewing still images
cH _ _OL
/LU /
2.3.4.5.
2,3,4,5
/
1 Press MENU to display the menu screen.
The menu screen appears
2 Press A/V to select PICTURE, then press
SET/SELECT.
ii
i
3 Press A/V to select OTHER, then press
SET/SELECT.
4 Press A/V to select 3D Y/C LEVEL, then press
SET/SELECT.
5 Press <l/l_ to set the mode to a level between 1
and 5 as needed.
If the setting is changed from "3", it is saved to the
USER mode setting (page 30),
After selecting, press SET/SELECT to enter your
selection
6 When the setup is finished, press MENU to exit
the menu screen.
Notes
• "3" is set when this unit is shipped from the factory
• 3D Y/C LEVEL setting is possible only when INPUT1 is
selected to receive a composite video signal
<ARE1"/49 > En
To Next Page
Loading...
