Pioneer PDP-505HD - Additional Information; Resetting to Factory Defaults; Cleaning and Maintenance

Resetting the unit to factory set
When the unit is in the operation mode, press
RETURN on the control panel on the main unit.
¢
ANDBW
--RETURN
Initial mode
Input selector ;
PICTURE
MODE :
SCREEN
Parameters ;
AUTO SCREEN :
MODE :
Set to INPUT1
STD
Set to 0
OFF
NA] URAL WIDE (VIDEO)
ORIGINAL (PC)*
V,POSITION; Set to 0
SET UP
POWER SAVE ; OFF
SIGNAL/FORMA]:-/COMPQNENT2 (INPUT2)
PC / RGB (INPUT3)
PC / RGB (INPUT4)
G QN SYNC; OFF (INPUT3)
OFF (INPUT4)
STILL OFF
* When the unit receives a signal which is not compatible with
the ORIGINAL screen size, it selects another cornpatibie
screen size in order of 4:3 NORMAL and FULL
Vents
Regular cleaning will extend the life and performance of
this unit, The recommended way to clean the display and
related parts is described below
Before cleaning, be sure to unplug the power cord from
the power outlet
Cleaning the display panel body and remote
control
DO [lOt undel any cilcurnstances use solvents sud] as
benzine or thinne_ for cleaneh Use of such liquids may
cause deterioration ol peeling of paint from the display ol
remote control unit
Wipe the display and remote control gently with a soft
cloth, In the case of excessive di_t buildup, dampen a soft
cloth with a diluted neutral cleaning detergent and afte_
wringing the cloth thoroughly, wipe the component and
then dry it with a @y soft cloth
Cleaning the screen
AP:er dusting, wipe the screen gently using the supplied
cleaning cloth o_ a soft cloth Do not use tissue or a rough
cloth. As the surface of the screen is easily scratched, do
not rub it or hit it with a hard object
Cleaning the vents
AS a general rule, use a vacuum cleaner about once a
month to cleat] the vents on the _ea_panel of the display
of dust buildup (set the vacuum cleane_ to its weakest
setting when doing this),
Using the unit without cleaning it of dust will cause the
internal temperature to increase, _esulting in possible
breakdown o_fi_e,
Vents
Notes
• The PICTURE mode "USER" settings are preserved
• INPUT LABEL settings are preserved
• HIGH CONTRAST settings are preserved
Vents