Pioneer PDP-505HD

IMPORTANT
The lightning flash with arrowhead symbol, within
all equilateral triallg]e, is intended to alert the user to
the presellce of Unlr_sulated "dangerous voltage"
within the product's erlclosure that may be of
suf[iclenL magnitude to coMstitute a risk of electric
shock to persor_s
CAUTION
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure area. This is for your
security,
CAUTION: This product may be used only with the
Model PDK-5001 stand. Use with other stands may result in
instability causing possible injury.
The exclamation point withill a[l equilateral tr]allgte
is intended to alert the user to the presence of
importarlt operaLirl_ and ma_nLerlance (servlcirl_)
illStrucLions in the literature accompanying the
appliance
The following symbols are found on labels
attached to the product. They alert the
operators and service personnel of this
equipment to any potentially dangerous
conditions.
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in personal injury
or property damage.
WARNING
This symbol refers to a hazard or unsafe
practice which can result in severe personal
injury or death.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofrV technician for help.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables
and connectors for connections.
I This Class B digital apparatus complies with Canadian ICES-003.
<ARE1349 > En