Saving screen adjustments to the
USER mode setting
The USER mode can be set for each of the fou_ video
signal inputs (INPUT1 to 4) and the two PC signal inputs
(INPUT3 and 4),
1-- E_43U4]JX_=
Q®®
G®®
Q@®
(9@@
2,5
3,4
4 Make any necessary adjustments to the screen
settings as described on the next page.
• If any of the programmed modes (STD, MOVIE, or
GAME) are adjusted, a new USER mode is created
based on the programmed settings, The base mode
will be listed in parenthesis,
• When HIGH CONTRAST is set to "ON" and a PC
signal is being input, MOVIE and GAME are not
available.
_II_dP#RJS_
5 When you have finished making adjustments,
press MENU to exit the menu screen.
1 Press the appropriate INPUT selector button to
display the input source on the screen,
2 Press MENU to display the menu screen.
The menu screen appears
3 Press i/v to select PICTURE, then press
SET/SELECT.
<ARE1"/49 > Er/
To Next Page
Loading...
