Clearing or resetting the number of mailpieces sent
Reset the piece counter to delete the piece count information.
Make certain that you wish to delete the piece count information. Once you do so, you cannot restore
the deleted data.
1. Tap Envelope Printing on the Home screen.
2. Tap Pieces.
3. Tap Reset Counter to 0.
Creating or disabling the security PIN
Create a security PIN to prevent unauthorised use of your device.
If you created a security PIN when you installed your device, you must enter it when you turn your
device on or after it enters sleep mode.
Create a security pin
1. Tap Settings.
2. Tap Security PIN in the Device & Network section.
3. Tap Create PIN.
4. Enter a 4-digit numeric PIN using the keyboard on the display.
5. Verify your PIN by entering it again.
Change or disable the security PIN
1. Tap Settings.
2. Tap Security PIN in the Device & Network section.
3. Tap Change PIN or Turn OFF Security PIN.
4. Enter the current security PIN for either option.
13 • Settings
Pitney Bowes User Guide March 2023 137
To Next Page
Loading...
