Installing the SendPro C, SendPro+
Follow these instructions to install a SendPro C, SendPro+ for the very first time.
1. Before you begin
2. Open the box
3. Unpack the device
4. Install the printhead
5. Install the ink cartridge
6. Connect device to a power source
7. Continue installation steps
Before you begin
Before you being installing your new SendPro C, SendPro+, you need to decide what type of
connection (wired or wireless) you want to use.
Choose your connection type
Wired Connections
Take about 10 minutes to set up
Require an ethernet port and power outlet.
Wireless Connections
Take about 15 minutes to set up
Require access to a wireless network and power outlet.
Open the box
In the box you will find:
1 • Installation
Pitney Bowes User Guide March 2023 9
To Next Page
Loading...
