3 ● Running Mail
mailstation
™
2 Digital Postal Meter | SV61983 Rev. H 3-5
Funds Report
Used: $ 0 3 1 . 6 0 0
Available: $ 0 6 8 . 4 0 0
Total Pieces: 2 9
Control Sum: $ 1 0 0 . 0 0
Batch Count: 3
Batch Value: $ 0 0 2 . 7 2 0
PBI Serial No.: 1 1 0 0 0 2 4
Account No.: 9 9 9 9 9 9 9 9
M A Y 2 6 0 9
4 : 3 3 p
Used – the total of all postage ever used in the meter
Available – the amount of postage left in the meter
Total Pieces – the total number of mail pieces run through the meter
that had postage applied
Control Sum – the total of all postage refills for the meter and equals
the amount Used plus Available. This is a postal requirement that
verifies an accurate accounting of the postage in your meter.
Batch Count – the number of mail pieces that had postage applied
since the last time the batch count was cleared
Batch Value – the amount of postage applied since the last time the
batch value was cleared
PBP Serial No. – serial number of this meter (normally meter
number)
Clearing the Batch Count
IMPORTANT: Make sure you really want to clear the batch count; once
you do, you can't restore the data.
1. Press Funds.
2. Use the Review keys to scroll to "Reset batch postage and pieces?”
and press Enter/yes.
3. Press Enter/yes to confirm that you want to clear these value. The
values return to zero.
4. Press Clear/Back to return to the main screen.
To Next Page
Loading...
