Appendix A • Passwords &
Meter Functions
mailstation
™
2 Digital Postal Meter | SV61983 Rev. H A-1 mailstation
™
2 Digital Postal Meter | SV61983 Rev. H A-1
Passwords can be set up on your system to prevent unauthorized
access to the machine and/or to a specific account. This appendix
explains the effects on system functions when using either or both types
of passwords.
NOTE: For information on setting up a password for the machine
itself (referred to as a "Lock Code" in this manual), see Chapter 6,
System Settings. For information on setting up a password for an
account when using the optional accounting feature, see Chapter 7,
Standard Accounting.
If you have this:
and have set it
to this:
then...
Meter Password
(Lock Code)
No Account
Passwords
activated
Lock Code
activated but
"Lock on sleep"
option is not set
on power-up,
or after awakening
the machine when the
machine was put in sleep
mode by pressing Lock,
you need to enter the
Lock Code password
Meter Password
(Lock Code)
No Account
Passwords
activated
Lock Code
activated and
"Lock on sleep"
option is set
on power-up,
or after awakening
the machine when the
machine was put in sleep
mode by pressing Lock,
or awakening from a
time-out induced sleep
mode,
you need to enter the
Lock Code password
To Next Page
Loading...
