5 ● System Settings
mailstation
™
2 Digital Postal Meter | SV61983 Rev. H 5-3
IMPORTANT:
• You cannot delete the preset, but you can define new values
for the preset based on the current condition of the machine.
• The preset values display after you turn on your machine or
after you activate the machine from "sleep" mode.
• When a rate change become effective, always check the
postage value assigned to the preset to make sure that it
complies with the new rates.
Turning the Preset Feature On or Off
1. Press Menu.
2. Use the Review keys to scroll to "Change setup?" and press Enter/
yes.
2. Use the Review keys to scroll to "Use preset setup?" and press
Enter/yes.
Turning ON Preset - Press Enter/yes at "Turn preset ON?" prompt.
A message confirms your choice. You may view the preset values
if you wish. When finished, press Clear/Back twice and follow
prompts to return to main screen.
Turning OFF Preset - Use the Review keys to scroll to "Turn preset
Off?" and press Enter/yes. A message confirms your choice. Press
No to return to main screen.
3. If you have turned on the preset feature, the main screen reflects
the preset settings. If you have turned off the preset feature, the
normal main screen displays.
Viewing the Preset
1. Press Menu.
2. Use the Review keys to scroll to "Change setup?" and press Enter/
yes.
3. Use the Review keys to scroll to "Use preset setup?" and press
Enter/yes.
4. At "View stored preset?" prompt, press Enter/yes.
5 Scroll through the preset values of class, ad, inscription, date etc.
6. When finished, press Clear/Back twice to return to main screen.
To Next Page
Loading...
