5 ● System Settings
mailstation
™
2 Digital Postal Meter | SV61983 Rev. H 5-9
Once you have determined the parcel is eligible, follow the steps below
to setup up Intra-BMC ZIP Code groups on you machine.
1. Press Menu.
2. Use the Review keys to scroll to "Change Setup" and press Enter/
yes.
3. Use the Review keys to scroll to "Use Intra BMC setup?" and press
Enter/yes.
4. Use the Review keys to scroll and select the option desired by
pressing Enter/yes (see list below). NOTE: If you have never used
this feature before, “Create new group” is the only available option.
Create New Group
A. Key in the first 3 digits of beginning ZIP and press Enter/yes.
B. Key in the first 3 digits of ending ZIP and press Enter/yes.
Edit Existing Group
A. Use the Review keys to scroll and select the group you want to
edit and press Enter/yes.
B. Key in the first 3 digits of beginning ZIP and press Enter/yes.
C. Key in the first 3 digits of ending ZIP and press Enter/yes.
Delete Existing Group
A. Use the Review keys to scroll and select the group you want to
delete and press Enter/yes.
B. Press Enter/yes to confirm the deletion.
5. For each option, you have a choice to continue in that mode. When
prompted to stay in setup, press No to return to main screen.
NOTE: When you are rating a parcel using the Parcel Post class and
the machine recognizes a destination ZIP Code that falls within an
Intra-BMC zone that you’ve established, it will use the discounted
Intra-BMC rate instead of the normal parcel rate.
To Next Page
Loading...
