FIG-1
FIG-2
FIG-3
35
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - CONTRAST PARAMETER
This sets the contrast level of the LCD screen.
This parameter can be set between 1 and 31 in
increments of 1.
FIG-2 - DBL CLICK PARAMETER
Sets where the Select button double-click can
be used.
> NONE: Double-click disabled.
> POWER UP: Double-click to power up only.
> ALL: Double-click to power up and access
menus.
FIG-3 - AUTO OFF PARAMETER
Sets the amount of time that elapses before the
marker switches itself o.
This parameter can be set between 05:00 and
60:00 minutes in 00:05 minute increments.
To Next Page
Loading...
